Elijah's House

Elijah Davidson's house started out as a Company House Kit 798 by LASERkit Xpress. I cut the front wall, where the wing started. The end wall of the wing was also cut about in half. The cut off piece was used to make a new wall to fill in the space between the front of the main house back to the narrower wing extension. I needed to add a strip of clapboard to the top of the new wall to reach the roof. The roof over the wing had to be cut down to fit the narrower wing, along with the roofing. The 1 piece front roof fascia had to be cut to fit the new roof lines. The extra corner boards were cut from the Small Parts carrier sheet. The house was painted and stained and then all the trim, doors and windows were installed, all of which had been pre-painted. After installing the windows I put on a layer of Gallery Glass to hold them in place and make them look old. A tree stump casting, a seated man and Blackie the dog complete the scene. An easy kit to assemble with good instructions, the hardest part are the peel and stick windows.